[Download][Firmware] Doogee Mix Official Stock Roms Collections

0

   This is the collections of original stock rom for the Doogee Mix, flashing this rom will help you to unbrick and refresh your phone to factory default and solve many problems. Just download the stock firmware below and flash with Sp Flash tool. This Official firmware is for the Doogee Mix smartphone “powered by MediaTek MT6757T processor.” versions only. Do not attempt to flash on any other Doogee Android Smartphones.

Some of the download links are not in english language, you must use a browser with automatic translation i recommend google Chrome.

As we all known there are two different variant of Doogee Mix available( 6GB/64GB and 4GB/64GB). Make sure you download and flash the correct firmware for your device below.

List of Official Roms Available For Doogee Mix 6gig Ram and 64Gig Storage Edition:

Doogee MIX_6 + 64_20180202
Download Link ( Mega)

Doogee Mix Silver edition  6+ 64_20180125
Download Link(Mega File)

DOOGEE MIX_Silver_6 + 64_20171101
Direct Download Link (Yandex Disk)

DOOGEE MIX_6 + 64_20171028
Direct Download Link(Mega)

DOOGEE MIX Silver_6+64_20170930 Released And OTA Supported
Download

DOOGEE MIX_6 + 64_20170812 supporting Camera2API
Download (Yandex Disk)

Doogee Mix 6GB RAM and 64GB Storage Edition  Firmware collections plus drivers in one folder
Download

List of Official Roms Available For Doogee Mix 4GB RAM and 64GB Storage Edition:

Doogee MIX_4 + 64_20180402_20180408-1033
Download

Doogee MIX_4 + 64_20180402_20180403-1031
Download

Doogee MIX_4 + 64_20170818_20180322-1003
DOOGEE-MIX-Helio_P25-20180322.zip
Download

Doogee MIX_4 + 64_20170818_20180208-1407
Download

MIX_4 + 64_20170818_20180119-1558 DOOGEE
Download

DOOGEE MIX_4 + 64_20171028
Direct Download (Mega)

How To Flash Firmware with Sp-Flashtool:

  •  Run sp Flash Tools as administrator
  •  Select scatter loading
  •  Then choose ANDROID_SCATTER.txt

 Click on Download or Upgrade firmware according to your phone state.

NOTE: You will have to choose DOWNLOAD only if your device is brick and you want to unbrick it. otherwise you can just select FIRMWARE UPGRADE.

  • Connect your phone switched off to your pc
  • The progress bar should start running
  • You will then see a success message with (a green circle with ok).
  • Disconnect the phone.
  • Do a Factory Reset in recovery mode to prevent errors.
  •  For more information check out this post Here

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.