This is the original stock rom for the  infinix hot  X507, flashing this rom will help you to unbrick and refresh your phone to factory default and solve many problems.  Just download the stock firmware below and flash with Sp Flash tool.


Only for the INFINIX HOT  X507. Do not attempted to flash on any other phones!!!!!.

You can check out this post on how to flash this firmware with sp flash tools HERE

Requirements :

  • A pc with healthy usb port and your infinix usb cable
  • An Infinix hot X507 device with a minimum of 20% battery charge
  • Make a backup copy of your personal files and contacts, messages and programs
  • Make sure Vcom port driver is installed on your pc. Download it here: HERE
  • Download Sp flash tools and install on your pc: HERE

Download Links: 

Official Infinix hot x507 Kitkat (4.4.2) download links: 

STOCK FIRMWARE 4.4.2
 LINK 1 HERE  (Password is mw777)
or
MEGA LINK HERE

Official Infinix hot x507 Lolipop (5.0) download links : 

STOCK FIRMWARE 5.0

LINK 1 HERE (Password is mw777) 

or 


INSTALLATION:

  • Run sp Flash Tools as administrator
  • Select scatter loading 
  • Then choose MT6580_ANDROID_SCATTER.txt
  • Click on Download or Upgrade firmware according to your phone state.
NOTE: You will have to choose DOWNLOAD only if your device is brick and you want to unbrick it. otherwise you can just select FIRMWARE UPGRADE.

  • Connect your phone switched off to your pc
  • The progress bar should start running
  • You will then see a success message with (a green circle with ok).
  • Disconnect the phone.
  • Do a Factory Reset in recovery mode to prevent errors. 
CHECK OUT THIS POST HERE   FOR MORE DETAILED INSTRUCTIONS

ENJOY YOUR PHONE........................... 
 


Abbey

Abbey

I am a phone engineer who has a passion for bloging, i am always happy to answer questions and help solve any problem. You are welcome to Phonetweakers.

Post A Comment:

0 comments: