This is the original stock rom for the new infinix hot 2 X510, flashing this rom will help you to unbrick and refresh your phone to factory default and solve many problems. Just download the stock firmare below and flash with Sp Flash tool.


Direct Download Links [872.1MB]:

Download From: 
OR

Requirements : 

  • A pc with healthy usb port and your infinix usb cable
  • An Infinix hot 2 X510 device with a minimum of 20% battery charge
  • Make a backup copy of your personal files and contacts, messages and programs
  • Make sure Vcom port driver is installed on your pc. Download it here: MEGA LINK
  • Download Sp flash tools and install on your pc here: MEDIAFIRE LINK

INSTALLATION:

  • Run sp Flash Tools as administrator
  • Select scatter loading  
  • Then choose MT6580_ANDROID_SCATTER.txt
  •  Click on Download or Upgrade firmware according to your phone state.
NOTE: You will have to choose DOWNLOAD only if your device is brick and you want to unbrick it. otherwise you can just select FIRMWARE UPGRADE.

  • Connect your phone switched off to your pc
  • The progress bar should start running
  • You will then see a success message with (a green circle with ok).
  • Disconnect the phone.
  • Do a Factory Reset in recovery mode to prevent errors.

Enjoy your phone.



Share To:

abbey banji

Post A Comment:

4 comments so far,Add yours

  1. Thanks a lot for this Bro, although I haven't try this file yet, just to tell you about what I'm presently facing, one of my friend purchase the infinix x510 android phone white colour, so I was trying to change the rom after I download the Rom which I have been using for other phone before so I just flash it with it and I get successful message so I try to power the phone the phone refused to on i try to boot to recovery but can't boot there so I try to re-format the phone since then sp flash tools keep showing Brom_error check your load match it must be download I try to find solution to it but still yet I haven't find any pls any help you can do for me, just to get the phone work back to normal. Thanks for reading this.my email address is Temidayoayodeji1@gmail.com

    ReplyDelete
  2. You can try using the format all+ download option in sp-flashtool and see if it will solve the problem.

    ReplyDelete
  3. hey, quick question, does this ROm work for all bricked x510 android phones?
    mine's bricked , keeps saying BROM ERROR, CHECK THE LOAD ,MATCHES blah blah blah when i used a ROM i had previously flashed it with

    ReplyDelete
    Replies
    1. Yes it should work, don't forget to use the format all + download options in flashtools

      Delete